T&I News Week 1 2016

T&I News Week 1 2016

Hello and happy new year!  It looks set to be a busy year ahead with a number of vehicles (rail and road) returning/entering service and so there should be no shortage of news to cover on the transport blog.  As this site has developed into a fully fledged website, it is worth drawing reader’s attention to the various galleries, articles and trade catalogues which are archived here – this year I hope to expand these sections as well as the stocklists which have remained ‘in development’ for a while now – the Commercial Vehicle section is currently being upgraded so do take a look…

As its our first day back at work officially, there isn’t too much from site to report on, but Seb Marshall has filled the gap with some photos of progress on our two projects that are with him at Historic Vehicle Restoration…

Morris Commercial

Below: We start with a view of the empty engine bay and newly painted bulkhead.

DSC_0001_01

Below: One refurbished brake master cylinder.

DSC_0019_02

Below: The gearbox, following reinstallation of the engine/gearbox unit.  Note the master cylinder within the frame channel to the right.  Also the Morris cover plate on the gearbox itself.

DSC_0046_01

Below: The other end of the view above, with the engine in place once again.

DSC_0021_03

Below: The addition of the radiator ‘fills’ the front end once again as pipework, bonnet stays and hoses are reconnected.  We expect completion of this phase of the project in the coming weeks…

DSC_0041

Leyland Cub Crosville 716

Below: Photos of the Cub were also received, showing that a busy Christmas break had been spent in the HVR workshop!

FB_IMG_1451850050923

Below: The offside front saloon panel has now been made – a complex shape and a highly skilled item to manufacture.  This now completes the panelling below the windows, though the beading/trim remains to be fitted.

DSC_0033_06

Below: The nearside wing has also been tackled – here is the supporting bracket after repair and priming.

DSC_0030_08

Below: The new wing in place…  The headlamp is a temporary addition as the set for the bus have been restored.

DSC_0025_09 DSC_0026_09 DSC_0027_09

Below: With the wing primed, the front end is rapidly being transformed.  There is still a lot of work on the domes and roof panels, but once completed, that is the vehicle ‘skinned’.

DSC_0038_06 DSC_0040_06

Odds and ends

Below: As the holiday wore on, the ability to resist the workshops decreased and so a productive day was spent on various little jobs, including rubbing down and re-priming the bonnet for the Model T Ford, which will then be painted into a military green shade as part of its transformation into a WW1 ‘Crewe Tractor’.  The radiator surround was also similarly treated.  It is hoped to have this project completed for the April Great War Steam Fair…

OLYMPUS DIGITAL CAMERA

Below: I also took the opportunity to clean and paint some of the components for my A Type motor roller U092 – see here are various fittings including a water tank (for spray gear when tarmac rolling), gear guard, petrol can carrier and a recreated works plate.  More on this project in due course…

OLYMPUS DIGITAL CAMERA OLYMPUS DIGITAL CAMERA