T&I News 7 2018... *UPDATED*

T&I News 7 2018… *UPDATED*

With Easter only a matter of days away now, and the forthcoming Great North Steam Fair also on the very near horizon, a huge amount of work is underway to ensure we are ready for both occasions. The first weekend of the Great North Festival of Transport has also taken place and is covered below. We start in the workshops, with a look at recent work undertaken within the Regional Heritage Engineering Centre…

RHEC

Below: The rebuild of the Morris Commercial has now finally been completed. This included an extensive engine/mechanical overhaul, a lot of cosmetic work, fitting of a new body and it being fully repainted and sign-written. The original donor’s livery has been retained, as can be seen here. It will be used by the site handymen so will continue to earn its living, despite dating from 1933! The indicators are a feature on the body that I think may disappear in time…!

IMG_7801 IMG_7802 IMG_7400

Below: Matt Bedard took some photos whilst the Morris was ‘brand new’…

IMG_7810 IMG_7812 IMG_7813

Below: Down in the Colliery David Grindley is awakening the locomotives from their winter slumber. Here is Coffee Pot No.1. Behind it are the non-operational chaldron waggons. These have had cosmetic attention in readiness for display outside again. No.18 is awaiting new brake turnbuckles – chasing a deadline for these by the end of the week in readiness for its fitness to run examination and re-entry into traffic for next the steam fair.

IMG_7553

Below: Much progress has been made on the narrow gauge rolling stock, as reported previously by Matt Ellis. Here is the beer waggon, which is now being plumbed up in order to give us a mobile water supply for the steam fair and other events. Care is being taken to make it look as ‘probable’ as possible and I think it looks terrific! Sign-writing is to follow…

IMG_7532

Below: The completed waggon, with balance pipes fitted and delivery hose installed…

image1

Below: The brakevan (we call it a braked tool van – more in keeping with the colliery environment it will live in) is now complete and will shortly move to the railway. The lettering is based on the style used by the Earl of Durham, the livery is a traditional style in the spirit of the early NER brakevans and I think really suits the van. Matt and I are so pleased with this vehicle that we can’t stop looking at it! Given the steep gradients we have on our little narrow gauge system, a well braked van has been something we have wanted for some time, sufficiently heavy to be able to restrain a train as well as its own weight. Testing will be undertaken very shortly to see how effective the van actually is…

IMG_7568 IMG_7567 IMG_7571

Below: The two bolsters on loan from the Apedale Valley Railway have been repaired, shot-blasted, painted and reassembled. These will be carrying timber once again during the steam fair. New coupling pins have also been made, complete with secondary fixings for safety.

IMG_7617

Below: The second Ffestiniog Railway granite side tipper has been quickly stripped and repainted… This is a fast turnaround in order to run it with the fully restored example completed by the BINGE volunteers recently – see them both at the steam fair…

IMG_7649 IMG_7804

image2

Below: In the RHEC the new framework (in steel) for the swing boats is being painted after Chris has spent the last few months manufacturing this sizable structure. It will hopefully prove rather more resistant (to weather and visitors) than the wooden framework had done and should minimise maintenance in the years to come – the appearance being exactly the same as its previous incarnation.

IMG_7805

Below: Horses continue to progress through the production line as Rebecca works her magic on the 36 original wooden examples from our steam gallopers.

IMG_7806

Below: Over in the tram depot, the D bus is being fitted with a new gearbox – Russell has been acquiring spare parts for this particular chassis, and this has paid dividends in ensuring the ongoing availability of this vehicle. In due course we may have to consider an alternative chassis/drivetrain for this bus – built in 1987 it has now had a far longer (and possibly harder!) life than the vehicles upon which it was based – certainly the original J2503 which ran for only a matter of months as a bus for Gateashead Tramways before being handed over for military work (as a lorry) in the First World War. It will also regain the solid-tyred wheels as part of this current programme of maintenance.

IMG_7612

Below: The completed project, with the bus tested and inspected and receiving a clean ahead of re-entering service in time for Easter.

IMG_7829

Below: John and Mike, who are the volunteers working on the Model T fleet, have now stripped the Ton Truck – seen here. It is fairly tired (very tired!) and will require extensive work to bring it up to the standard of the Crewe Tractor and Tourer (seen behind). It will be outshopped with an C style cab in place of the American one previously fitted; and a refuse body in place of the dropside. This will enable it to access parts of the site, such as the forthcoming Spainsfield Farm area, where modern vehicles are not desirable.

IMG_7620 IMG_7619 IMG_7618

Below: Tony and Matt (seen here) have been engaged in splitting timbers for Joe the Quilter’s cottage – having produced the crucks which support the roof. They are now working on the purlins and rafters – time consuming and repetitive work…

IMG_7803

Below: Matt B also supplied these photographs showing the RHEC made components in situ. For those not familiar with this building, more information can be found on the main Museum website. The roof will be heather thatched, over a base layer of turf. The style and construction reflecting materials in a fairly raw and primitive state. The construction is pegged together – the bolts visible were fitted to enable the timbers to be carried in one piece from the RHEC to the site.

IMG_7807 IMG_7808 IMG_7809 IMG_7815 IMG_7816

Below: In conjunction with the new developments, an extensive display of signage of an appropriate style (and both printed and signwritten) has been attached to the boundary fence along the 1950s development area in order to explain something of the plan and also illustrate some of the shops and amenities that we are building in this area. Sheffield 264 and the first real spring sunshine accompany this scene.

IMG_7550

Pedal and Bus Power event

As the Old King Coal event has moved to June, a new idea was trialled this March – originally Pedal Power, but expanded to include buses, the event last weekend was considered successful and will, in a modified format, reappear in 2019. We had a number of visiting buses, both on display and in operation, giving us the best transport service we’ve ever operated! Part of the tramway was closed to trams so as to allow rail-cycles to be demonstrated on the reserved track sections. Cumbria Classic Coaches and the Aycliffe & District Bus Preservation Group sent vehicles, alongside some private examples as well as our own. Hopefully for 2019’s event we’ll gave the new bus depot as a feature of the activities… Meanwhile, here is a sample of what could be seen during the weekend (more photos appear on Beamish’s Facebook page).

IMG_7602 IMG_7591 IMG_7595 IMG_7597 IMG_7604 IMG_7607 IMG_7609 IMG_7611 IMG_7622 IMG_7625 IMG_7643 IMG_7644 IMG_7647 IMG_7648

Posted by Paul Jarman

Assistant Director – Curatorial