A couple of shots today of the Steam Mule…
Below: The water tank, John Moore having welded on the rivet heads. This makes a marked improvement in the appearance of the tank, which is, after all, supposed to look old! The welded tank does ensure that it is watertight however!
Below: The fixed axle end, showing the cast brackets in place.
Below: An overall view, with the tank loosely placed and the pump resting on top of the tank bottom (!).
Below: Meanwhile, in David Young’s workshop… The new crankshaft is tested in place, the connecting rod is fitted and the first coats of undercoat are applied.
Recent Comments